Fully automatic servo carton opening machine OK2S-650
Simple structure, easy operation, and maintenance.
The entire machine is equipped with a robotic arm, providing a high degree of automation and reducing labor costs.
Low noise, smooth operation, and no damage to cartons.
The tilting, non-powered storage system allows for immediate replenishment of cartons without downtime.
Focusing on fully automated packaging system solutions, it seamlessly integrates with front-end and back-end equipment.
Three servo motors drive the carton feeder, ensuring a perfectly square cartons.
The machine is compact, requiring minimal floor space.
It can be customized to meet customer needs and is widely used in various industries.
زيادة الإنتاج
نظام المعالجة الكامل
نوعية ممتازة
Fully automatic servo carton opening machine OK2S-650
More Information
Product Details
aKey Performance Features:
- Simple Structure, Easy Operation: The machine is designed with a simple structure for easy operation and maintenance, making it widely applicable across various industries.
- Tilting Non-Powered Carton Storage:The tilting non-powered carton storage system enables continuous replenishment without downtime.
- Servo-Driven Carton Retrieval and Pushing: Two servo motors drive carton retrieval and pushing, ensuring precise positioning without manual adjustment.
- Open Side Structure for Better Visibility: The open-sided structure along the carton transport path provides operators with better visibility and easier operation.
- User-Friendly Display Interface: The operation display interface is simple, clean, and intuitive for ease of use.
- Cylinder-Based Carton Forming: Cartons are formed using cylinders, ensuring simple and straightforward adjustments.
- Compact Design: The machine features a compact design, minimizing space requirements and reducing its footprint.
- Low Noise and Smooth Operation: The machine operates with low noise and smooth performance, ensuring no damage to cartons.
- Seamless Integration: It can be seamlessly integrated with upstream and downstream equipment to enhance overall production efficiency.
- Customizable Options:Standard models feature a carbon steel frame with painted surface (matt silver). Customization is available based on customer specifications.
Parameter table
| Model | Box Opener OK2S PRO | Box Opener OK2S | OK3S-400 Robotic Carton Opener |
| Carton opener（m/min） | 5~15 pieces/minute | 5~15 pieces/minute | 5~15 pieces/minute |
| Carton size (maximum size and minimum size cannot exist at the same time) |
280-660 | 280-500 | 140-420 |
| 180-500 | 150-400 | 80-350 | |
| 150-500 | 150-400 | 150-350 | |
| Total power | 1 | 1 | 2.3 |
| Air pressure source supply (kgf/cm2) | 6 kgf/cm2 | 6 kgf/cm2 | |
| Net weight of machine (kg) | 450 kg | 320 kg | 550 |
| Machine dimensions (length x width x height) (mm) | 2300*2030*1573 | 1950*1800*1400 | 2400*1900*1400 |
| Power supply type | 220 volts 50 Hz | 220 volts 50 Hz | 220 Volts 50HZ |
| Applicable tape | لا. 48; لا. 60; لا. 75 | لا. 48; لا. 60; لا. 75 | Width less than 50mm |
Configuration plan
Precautions for Carton Openers
About Creases:
1. For cartons with a thickness of 5 or more layers, the creases should be deep.
2. For cartons with a thickness of 5 or more layers, the long side creases should ideally be one carton thickness higher than the front and rear wide creases.
About Side A:
1. Side A refers to the front of the carton that the carton opener’s suction cups will hold.
2. The printing direction of Side A determines the top and bottom of the carton.
3. The printing direction of Side A determines the machine’s forming direction (left or right).
4. The direction of Side A must be consistent across all machines.
5. Before forming, ensure that Side A has no fold marks and that the surface is smooth.
About Material:
1. The material should not be too soft and the surface should be smooth. Samples should be provided if possible, especially for high-speed carton openers.
2. For materials with a thickness of 5 or more layers, sample verification is required. Regarding Beveling:
1. In principle, the inner flaps of all carton materials must be beveled, especially for cartons with more than five layers and requiring faster production.
2. The purpose of beveling is to prevent jamming during unpacking and forming due to non-standard construction during stapling or gluing.
3. The bevel placement is shown in the diagram. The cut dimensions are: H is approximately 2/3 the height of the front and back inner flaps, and W is approximately 4 times the thickness of the carton.
About the flaps:
1. When manually folded and flattened, the outer flaps on both sides must not overlap; ensure a 2-3 mm gap.
2. When folded and flattened, the front and back inner flaps must not overlap. If this occurs, a sample must be provided.
3. The front and back inner flaps and the outer flaps on a square box are generally the same size, so beveling is essential for proper forming. Regarding dimensions:
1. When planning a carton opener, it is recommended to provide a complete specification list (length, width, and height) as a reference.
2. Special attention should be paid to rectangular boxes or boxes with significantly different length, width, and height ratios.
3. Carton openers with the same mechanism generally work with larger boxes, not smaller ones, and vice versa.
4. The same mechanism is not suitable for handling cartons with significantly different proportions.
ملاحة
أخبار
قضية
البريد الإلكتروني للشركة:
xiaochao@okbolong.cn cissie@okbolong.cn
الهاتف والواتس اب
+86 18086324317 +86 18279788185
عنوان الشركة:
قاعدة الإنتاج: OK مجمع العلوم والتكنولوجيا الصناعي, مقاطعة شيوشوي ,مدينة جيوجيانغ, مقاطعة جيانغشي مقر المكتب: 22 / ف, المبنى المركزي 2, حديقة تيانان للعلوم والتكنولوجيا, 555 شارع شمال بانيو,قوانغتشو
© حقوق الطبع والنشر لشركة Jiangxi OK Bolong للمعدات الذكية المحدودة
